Conveying Quick Reference Guide                                                          Conveying

Access™ Loader                 

• Angled canister equals easy service and cleaning
• All non-ferrous construction standard
• Full featured control

Current Manual  

Ratio Valve Retrofit Instructions

All Products  |  Top of Page

• Angled canister equals easier access and cleaning
• All non-ferrous construction standard
• Integrates easily with existing loading systems

Current Manual

Ratio Valve Retrofit Instructions

Common Line Valve Retrofit Instructions

Common Line Valve to Ratio Valve Upgrade Kit Instructions

All Products  |  Top of Page

• Hinged lid design allows easy, efficient hopper cleanout without removal of the loader or receiver
• All non-ferrous material contact points
• Dual sight glasses allow you to check your material level at a glance

All Products  |  Top of Page

• New design ensures positive material shut off and successfully evacuates all material from the valve during purging
• All aluminum body and stainless steel valve components
• 360 degree swiveling material outlet allows quick placement of equipment during installation

Current Manual

All Products  |  Top of Page

• Pumps from 3 to 16 Hp
• Airflow at material pickup          range from 41-138 ft³/min
• Airflow at pump inlet range from 56 to 226 ft³/min
• Requires no maintenance

Current Manual

All Products  |  Top of Page

• Unique tube design eliminates traditional conical hopper
• Direct feed or hopper loading
• Large discharge valve, 4.5 inch diameter 
• Transfers up to 100 lb/hr or material 
• All stainless steel construction
• Easy-access hinged motor
• Ratio loading available

Current Manual

All Products  |  Top of Page

• Compact machine-mounted hopper holds ~0.3 cubic feet of material
• Self-locking hinged lid accommodates Conair loaders 
  TLM, DL8 and DB8
• Clear polycarbonate removable cone for confirming fill, material flow 

Current Manual

All Products  |  Top of Page

• Integral vacuum motor conveying method
• Direct feed or hopper loading
• Maximum receiver volume from 0.14 cu ft (4 liters) to 0.5 cu ft (14.2 liters) 
• Carbon steel construction standard, stainless steel available
• Single material loading standard, ratio loading available

Current Manual

All Products  |  Top of Page

• Compressed air conveying method
• Maximum throughput of 700 lbs/hr (318 kg/hr)
• Stainless steel construction standard
• JIT loading
• Single material loading standard, ratio loading available
• Direct feed for hopper loading

Current Manual

All Products  |  Top of Page

• Compressed air conveying method
• Recommended throughput of 60 lbs/hr (27 kg/hr)
• JIT loading to machine throat or to feeders
• Stainless steel construction only
• Single material loading only

All Products  |  Top of Page

• Compressed air conveying method
• Maximum throughput of 700 lbs/hr (318 kg/hr)
• Carbon steel construction standard, stainless steel available
• JIT loading
• Single material loading standard, ratio loading available
• Direct feed or hopper loading

All Products  |  Top of Page

• Compressed air conveying method
• Recommended throughput of 250 lbs/hr (113 kg/hr)
• Stainless steel construction
• Single material loading only
• Hopper loading

All Products  |  Top of Page

• Compressed air conveying method
• Recommended throughput of 400 lbs/hr (181 kg/hr)
• Stainless steel construction only
• Hopper loading
• Single material loading only

All Products  |  Top of Page

• Compressed air conveying method
• Maximum throughput of 700 lbs/hr (318 kg/hr)
• Carbon/aluminum construction
• Bin evacuation
• Ideal for granulator evacuation

Energy Miser Valve Option

All Products  |  Top of Page

• Fill gaylords directly
• Maximum throughput of 700 lbs/hr (318 kg/hr)
• Movable fill tube
• Built in overfill alarm
• Ideal for granulator evacuation

Current Manual

Energy Miser Valve Option

• Central vacuum conveying method
• Maximum receiver volume 0.10 cu ft (2.8 liters)
• Stainless steel construction standard
• Direct feed or hopper loading
• Ratio loading available

Current Manual

All Products  |  Top of Page

• Central vacuum conveying method
• Maximum receiver volume.009 cu ft (.25 liters) to .14 cu ft (3.96 liters)
• Carbon steel construction standard, stainless steel available
• Direct feed (JIT)
• Single material loading only

All Products  |  Top of Page

• Central vacuum conveying method
• Maximum receiver volume from .14 cu ft (4.0 liters) to 4.0 cu ft (113.3 liters)
• Carbon steel construction standard, stainless steel available
• Single material loading standard, ratio loading available

All Products  |  Top of Page

• Central vacuum conveying method
• Direct feed or hopper loading
• Maximum receiver volume from .5 cu ft (14.2 liters) to 2.3 cu ft (65.1 liters)
• Carbon steel construction standard, stainless steel available
• Single material loading standard, ratio loading available

All Products  |  Top of Page

• Filter receiver made for conveying fine powders
• Blowback with accumulator included
• Dual, pleated filters are easy to remove
• Low profile design fits anywhere
• Suitable for 5 hp through 10 hp vacuum systems

All Products  |  Top of Page

• Powerful management of your auxiliaries - view your system at a glance
• Easily add versatility to your system by adding a completely new product module to expand your plant-wide capabilities
• Remote off-site access with a web-enabled PC using your VPN client to stay connected to your system
• Download or instantly recall blender recipes

All Products  |  Top of Page

• "Local" controls at each loader
• Digital readout provides setting ease/precision
• Simple, inexpensive "daisy chain" series wiring
• For 24 VAC or 120 VAC systems

Current Manual

All Products  |  Top of Page

• Easy-to-read display
• First-In/First-Out demand loading for the ELC-16 control
• Configure for priority receiver demand with the optional ControlMate^TM pendant
• Use the optional ControlMate^TM
 to activate and alter up to 16 additional loading parameters. (On/Off, Unload Time, Load Attempts, Ratio Layers, Ratio Percentage, Purge Time, Load Time, Blowback, Priority Demand Fill Sensor Logic, Demand Sensor Logic, Fill Sensor Present, Load and Hold, Purge/APV (Adjustable Purge Valve), Ratio Installed, Blowback Installed)

Current Manual

All Products  |  Top of Page

• Central, Distrivuted or Remote controls.
• Support for 30 to 96+ loaders
• Support for up to 4 operator stations
• Allen Bradley CompactLogix

Spec Sheet

Current Manual

Quick Card

All Products  |  Top of Page

• Controls 8 loading devices, 2  vacuum pumps, plus 1 back-up as standard. Quickly and easily expands to 32 loaders, 10 vacuum pumps, plus 1 back-up
• Touch screen control is easy-to-use, easy-to-view
• First-in/First-out (FIFO) demand loading
• Fully-functional remote HMI units available
• Remote access via web pages.  View your system from any PC anytime, anywhere.

All Products  |  Top of Page

• Centrally located enclosure controls up to 64 vacuum loaders and 10 vacuum pumps, plus 2 back-up pumps
• Easy-to-read, Easy-to-use color-coded, graphical display
• Multiple pump capacity with backup
• On-board help simplifies use and ensures maximum usability

Current Manual

All Products  |  Top of Page

• Centrally located enclosure controls up to 32 loaders
• Available in 8, 16 and 32 loader models
• Multiple pump capacity with backup
• Allen Bradley MicroLogix 1500 PLC

Current Manual

• Centrally located enclosure controls up to 32 loaders and 8 vacuum pumps
• Flexible loader-pump assignments 
• Communicates via I/O modules along a flat media cable

Current Manual

• Control up to 48 loaders and 8 vacuum pumps
• Operate all loader functions from one location
• Color touchscreen operator interface
• 6" screen standard, 10.4" screen optional
• Allen Bradley PLC

Current Manual
Wiring Information

All Products  |  Top of Page

• Control up to 48 loaders and 8 pumps, plus backup
• Add I/O blocks as loaders are added
• Color touchscreen in a centrally located control enclosure
• Distributed I/O with flat media cables
• Super-fast installation requires no stripping or terminating

Current Manual

All Products  |  Top of Page

• CFM range 52.6 to 346.2
• Pumps from 3 to 25 hp

Current Manual

All Products  |  Top of Page

• Ready-to-use vacuum source requiring no oil or belts plus and easy-to-clean cartridge filter
• Pumps from 2.33 to 6.16 hp
• Maximum throughputs from 900 to 3200 lbs (408 to 1452 kg)

Current Manual

All Products  |  Top of Page

• Single phase vacuum pumps use 115 VAC
• 7/8 hp or 1.4 hp models
• 4 brush models standard, brushless models optional
• Includes dust collector for small loading systems.

Current Manual

All Products  |  Top of Page

• Filter area from 43 to 162 square feet
• Supports pump sizes from 3 hp to 25 hp

Current Manual for DC 1 and 2-
English
Spanish

Current Manual for DC 3

All Products  |  Top of Page

• Vacuum Railcar Unloading Systems
• Resin Selection Station
• Floor Level Fantail Manifold
• Upright Fantail Manifold
• Selector Plates
• Distribution Boxes
• Distribution Boxes - Current Manual
• Slide Gates
• Common Line Valves
• Ratio Valves
• Purge Valves
• Pocket Conveying Valves
• Couplings, Tubing and Hoses
• Ratio Proportioning Valves
• Installing Line Size Tube Adapters

All Products  |  Top of Page

• Universal Alarm Kits
• Angel Hair Remover
• Magnets
• Pellet Collection Trays
• Central Vacuum System
• Metalout
• Bulk Pump